Drainage Design Services
A complete list of all our areas of work is given on our
and briefly our main areas of operation are as follows:
• River Modelling.
We would normally use Flood Modeller Pro or TUFLOW software for river modelling although we can use HEC-RAS software if required.
including the estimation of watercourse flows using Flood Estimation Handbook methods.
• Expert Witness Services.
We are able to offer the services of one of our senior staff as an expert witness in the sewerage and drainage area of civil engineering.
• Flood Risk Assessments,
for use in England and a similar document
Flood Consequence Assessments,
for use in Wales. Both these reports assess the flood risk to a proposed development itself and also the change in flood risk to third parties as a result of the new development.
• Drainage for New Developments.
Preliminary and detail design of drainage for new 'green' and 'brown' field developments including both foul and surface water systems. The latter is
likely to involve using
SUDS (Sustainable Drainage System)
To enable us to carry out the types of work outlined above we have a range of drainage design and analysis software which is summarised on our
Drainage Design and Analysis Software
page and also listed below.
• FEH (Flood Estimation Handbook)
• Micro Drainage: Source Control,
System 1 and Simulation modules
• Flood Modeller Pro (formerly ISIS)
• TUFLOW (River Modelling)
• HEC-RAS (River Modelling)
• AutoCAD Civil 3D
We have completed a wide range of projects over recent years, please see our
page for details.
for further details.